Baumatic P75SS Bedienungsanleitung PDF herunterladen (Seite 21)

o Put the gas seal into the elbow.

o Fully tighten the elbow and seal onto the gas rail.

o The elbow MUST be pointing in a downwards direction.

o Gas pressure may be checked on a semi-rapid hob burner.

Remove the appropriate injector and attach a test nipple. Light

the other burners and observe that the gas pressure complies

with the gas standards in force.

o IMPORTANT: On completion carry out a gas soundness

test.

Gas adjustment (Conversion to LPG and flow adjustment).

All work must be carried out by a CORGI registered

engineer.

IMPORTANT: Always isolate the cooker from the electricity

supply before changing the injectors and/or adjusting the

minimum flow of the burners.

o Remove the pan-stands, burners and

flame spreaders (A).

o Unscrew the injector (B) and replace it

with the stipulated injector for the new gas

supply (see table below).

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27

Keine Kommentare

Baumatic P75SS Bedienungsanleitung Seite 21