Baumatic BHC900 Bedienungsanleitung

1 BHC900 90 cm touch control ceramic hob

Control panel layout 1) Burner power control buttons 2) Timer plus and minus buttons 3) 2.20 kW dual zone activation button 4) 2.00 kW dual zon

Touch controls o All operations are performed by means of the touch controls that can be found on the control panel. o Each touch control has a v

Switching off the hob o Once you have switched off all of the cooking zones, you should turn off the hob. o Press the ON/OFF button (6). o It i

timer display and you are then able to adjust the power of any zone on the hob top. The hob timer Your hob has a timer which will countdown

o The completion of the countdown time will be indicated by an audible sound and the hob will switch off completely. IMPORTANT: The countdown timer

15Hob guidelines o The first few times the hob top is used, it may give off an acrid, burning smell. This smell will disappear completely with repe

o DO NOT USE THE HOB IF THE SURFACE BECOMES BROKEN OR CRACKED. YOU SHOULD CONTACT THE CUSTOMER CARE DEPARTMENT IMMEDIATELY. Cleaning and maintenance

discolouration cleaner Water splashes or water rings No Yes Ceramic hob cleaner Using a ceramic hob scraper Your appliance will be provided with a h

Installation The installation must be carried out by a suitably qualified person, in accordance with the current version of the following. o UK Reg

4 Fixing brackets 4 Fixing screws 1 Sealing strip Installing the appliance o Cut a hole in the worktop that corresponds with the drawing

User Manual for your Baumatic BHC900 90 cm Front touch control 4 zone ceramic hob. NOTE: This User Instruction Manual contains i

o IMPORTANT: You must observe the ventilation requirements shown in the drawing above. o IMPORTANT: There are ventilation holes around the outside

o There are holes on the base or the sides of the hob that you can fix the four brackets to. There are three holes in each one of the brackets. 21 o

Connecting the mains supply cable o The mains terminal block is located on the underside of the hob and the terminals are accessi

o If when the hob is first switched on, only two of the zones work, you should recheck that the terminal screws are all fully tightened. This should

24My appliance isn’t working correctly o The cooking zones are not functioning or will not switch on. * It has been more than 2 minutes since the

IMPORTANT: If your appliance appears not to be operating correctly, then you should disconnect it from your mains supply and then contact Baumatic Cus

United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Sales Telephone (0118) 933 6900 Sal

27

28 28

3Contents Environmental note 4 Important safety information 5 – 8 Specifications 8 – 10 Dimensions 8 Specifications

Environmental note 4 o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard

Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before atte

6Child Safety o Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and not allowed to touch

Cleaning o Cleaning of the hob should be carried out on a regular basis. o IMPORTANT: Before attempting to clean the appliance, it should be disc

o Pans should be lifted on and off the hob surface and not dragged. o Cooking zones should not be switched on without cookware placed on it. Also t

Standard accessories o Ceramic hob scraper Electrical details Rated Voltage: 220 - 240 Vac 50 - 60 Hz Supply Connection: 32 A (double pole swi