Baumatic BHI710 Bedienungsanleitung PDF herunterladen (Seite 16)

o If you wish to cancel the booster function before the 5 minute

time period has elapsed, use the zone selection button to select

the back right cooking zone. Then press the booster button (1)

again and the cooking zone will return to its original power level.

o If you press the minus button, the cooking zone will be set to

power level 9.

Pan sensor

Each cooking zone has a sensor on it, so it can detect the presence of

a pan.

o The sensor is fine-tuned to detect a pan being

placed on it. The pan should be one size smaller

than the nominal diameter of the cooking zone.

o If the symbol shown above appears on a cooking zone indicator

(3) after you have placed a pan on a cooking zone and selected

it; this means that the pan is either the incorrect size or shape.

Or it could be made from a material that is inappropriate for use

on an induction zone hob.

o If a cooking zone is selected but no pan is detected, the pan

sensor system will check for the presence of a pan

approximately every few seconds.

o You should check that your pans are suitable for use on an

induction zone hob (see the pan manufacturer’s trademark or

instructions).

Cookware that is suitable for an induction hob

The table below shows cookware that is normally suitable for use on

an induction zone hob:-

Cookware Suitable

Steel, enamelled steel Yes

Cast iron Yes

Stainless steel Yes (if stated by the pan

manufacturer)

Aluminium, copper, brass No

Glass, ceramic, porcelain No

o The bottom of the pans should be as flat and thick as possible.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Keine Kommentare

Baumatic BHI710 Bedienungsanleitung Seite 16