Baumatic BHI610 Bedienungsanleitung PDF herunterladen (Seite 15)

o If the symbol shown above appears on a cooking zone indicator

(2) after you have placed a pan on a cooking zone and selected

it; this means that the pan is either the incorrect size or shape.

Or it could be made from a material that is inappropriate for use

on an induction zone hob.

o If a cooking zone is selected but no pan is detected, the pan

sensor system will check for the presence of a pan

approximately every few seconds.

o You should check that your pans are suitable for use on an

induction zone hob (see the pan manufacturer’s trademark or

instructions).

Cookware that is suitable for an induction hob

The table below shows cookware that is normally suitable for use on

an induction zone hob:-

Cookware Suitable

Steel, enamelled steel Yes

Cast iron Yes

Stainless steel Yes (if stated by the pan

manufacturer)

Aluminium, copper, brass No

Glass, ceramic, porcelain No

o The bottom of the pans should be as flat and thick as possible.

o Certain types of cookware may result in a noise being made

when being used on an induction zone hob. This does not mean

that there is an appliance fault.

o IMPORTANT: You should make sure that all pans are placed in

the centre of the induction zone that you are using.

The hob timer

Your hob has a timer which will countdown a period of time between 1

and 99 minutes. At the end of the countdown period an audible signal

will sound.

o Press the ON/OFF button (5)

o The cooking zone indicators (2) will all read “-”.

o Press the zone selection button (8) of the cooking zone that you

want to use.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Keine Kommentare

Baumatic BHI610 Bedienungsanleitung Seite 15