Baumatic BF13.3R Bedienungsanleitung PDF herunterladen (Seite 11)

Switching on a zone and setting a power level

IMPORTANT: A zone must be selected within 2 minutes of switching

the hob on.

o Press the plus button (3) of the cooking zone you wish to switch

on to activate the zone.

o Adjust the zone temperature between power levels 1 and 9,

using the plus and minus buttons. By holding down either of

these buttons, the value on the zone indicator (2) will adjust up

or down.

Switching off a zone

o Press the cooking zone plus button of the zone that you want to

switch off.

o Hold the minus button down until the number in the cooking

zone indicator reaches “0”. After a few seconds, the zone will

switch off automatically.

o Alternatively you can press the relevant plus and minus buttons

simultaneously to set the power level back to “0”.

o The letter “H” will show in the cooking zone indicator, (see the

section on the “residual heat indicator”), if the appliance is still

hot.

Switching off the hob

o Once you have switched off all of the

cooking zones, you should turn off the

hob.

o Press the ON/OFF button (1).

o It is possible to turn the hob off at any time by pressing the

ON/OFF button (1).

Residual heat indicator

is therefore still high enough to cause injury.

o After a zone is switched off, the cooking zone

indicator will show a flashing letter “H”. This means

that the temperature of the zone is over 60°C and

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Keine Kommentare

Baumatic BF13.3R Bedienungsanleitung Seite 11