Baumatic B68.1SS Bedienungsanleitung PDF herunterladen (Seite 26)

rn the hob upside down and place it on a cushioned

mat.

o Apply the sealing strip (A) provided around the edge of the

thickness.

Do not use a silicon sealant to seal the appliance

w o remove the hob

if it needs to be serviced.

A) Sealing strip

B) Clamp

C) Screw

B) over the holes that match the size of the

screws. There are one set of screw holes in each corner of the

so that you can still adjust

the position of it.

o Carefully tu

appliance.

o The protective covering must be removed from both sides.

o Do not leave a gap in the sealing agent or overlap the

o IMPORTANT:

against the aperture. This

from the aperture in future

ill make it difficult t

(

o Place the clamp (

hob. Slightly tighten a screw (C) through the clamp (B) so that

the clamp is attached to the hob, but

o Carefully turn the hob back over and then gently lower it into the

aperture hole that you have cut out.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

Keine Kommentare

Baumatic B68.1SS Bedienungsanleitung Seite 26