Baumatic PHC720SS Bedienungsanleitung PDF herunterladen (Seite 28)

o Place the fixing brackets (B) over each hole and clip, and then

place a screw (C) through the hole and fixing bracket (B).

Tighten the screws a little way, so that they stay in place.

IMPORTANT: Do not tighten the screws fully.

o Carefully turn the hob back over and then gently lower it into the

aperture hole that you have cut out.

o On the underneath of the hob,

locate the fixing brackets (B) and

turn them so that they locate on

the underneath of the worktop

and the hob.

o Fully tighten the screws (C) to

secure the hob into position.

Electrical connection

This appliance must be installed by a qualified

person in accordance with the latest edition of the

I.E.E. Regulations and in compliance with Baumatic’s

instructions.

Before connecting the appliance, make sure that the supply voltage

marked on the rating plate corresponds with your mains supply

voltage.

WARNING: THIS APPLIANCE MUST BE EARTHED.

o The PHC620SS/PHC622SS appliance must be wired into a 30

A double pole switched fused spur outlet, having 3 mm contact

separation and placed in an easily accessible position adjacent to

the appliance. It should not be located above the appliance and

no more than 1.25m away from it.

o The PHC720SS appliance must be wired into a 32 A double pole

switched fused spur outlet, having 3 mm contact separation and

placed in an easily accessible position adjacent to the appliance.

It should not be located above the appliance and no more than

1.25m away from it.

o The spur outlet must still be accessible even when your oven is

located in its operating position.

o Cable type: H05 RRF 3 core x 6 mm²

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Keine Kommentare

Baumatic PHC720SS Bedienungsanleitung Seite 28