Baumatic B65.5SS Bedienungsanleitung PDF herunterladen (Seite 18)

marked in the diagram opposite and

once established ALL terminal screws

should recheck that the terminal

screws are all fully tightened

he Baumatic

Customer Care Department.

o he cable can be looped if necessary, but make sure that is not

b is in position. Care must be

taken to avoid the cable being in contact with hot parts of the

s supply cable

nt which can be obtained from the Baumatic

pares Department.

mains supply cable should be replaced in accordance with the

itch.

o Unscrew the terminal screws fixing the cable.

o ce

with the specification given above.

minal

o The brass links must be positioned as

must be tightened down firmly.

o If when the hob is first switched on,

only two of the zones work, you

between the links. This should be

done before contacting t

IMPORTANT: The appliance must NOT be connected to the

mains supply by means of a 13A plug and socket.

kinked or trapped when the ho

appliance.

Replacing the main

If the mains supply cable is damaged, then it must be replaced by an

appropriate replaceme

hT e

following instructions:

o Switch the appliance off at the control sw

o Open the terminal block on the underside of the hob.

Replace the cable with one of the same length and in accordan

o The “green-yellow” earth wire must be connected to the ter

marked

. It must be about 10 mm longer than the live and

neutral wires.

o he “blue” neutral wire must be connected to the terminal

be connected to the

terminal marked with letter (L).

marked with letter (N) - the live wire must

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

Baumatic B65.5SS Bedienungsanleitung Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Baumatic B65.5SS