using BHC600 60 cm/ BHC700 70 cm touch control ceramic hob
For future reference please record the following information which can be found on the rating plate and the date of purchase which can be found on yo
Using the ceramic hob Before first use IMPORTANT: You should clean the ceramic hob surface (see “Cleaning and maintenance” section). o You should
o If you wish to switch on another zone whilst another is already in use, simply press the ON/OFF button for the zone in question. o IMPORTANT: WHE
13o A neon above the safety lock button will light to show that the safety lock feature has been switched on. o When the safety lock feature is ac
o Before use, make sure that the bottoms of the saucepans are clean and dry. o When cold, the bottom of the pans should be slightly concave, as the
Abrasive cleaners or sharp objects will damage the hob surface; you should clean it using water and a little washing up liquid. Although it is easier
o The ceramic surface should be wiped with a damp cloth and a small amount of washing up liquid. o Dry the appliance by rubbing the surface with a
Unpacking the appliance When unpacking the appliance please check that the following items are contained within the packaging:- 1 Baumatic hob 1 Cer
BHC700 o Cut a hole in the worktop that corresponds with the relevant drawing shown above. 18o IMPORTANT: You must observe the
o Carefully turn the hob upside down and place it on a cushioned mat. o Apply the sealing strip provided around the edge of the appliance. o The
2 User Manual for your Baumatic BHC600 60 cm Side Touch control 4 zone ceramic hob BHC700 70 cm Side touch control 4 zone ceramic hob
o You should place the bracket on the underneath of the hob, in a position that is appropriate for the aperture that you have cut out. Using the scr
o The cable connections must be in accordance with the diagram located on the bottom of the hob (see above) o The brass link mus
o If when the hob is first switched on, only two of the zones work, you should recheck that the terminal screws are all fully tightened and that the
23My appliance isn’t working correctly o The cooking zones are not functioning or will not switch on. * It has been more than 1 minute since a zo
2433 6911. IMPORTANT: If your appliance appears not to be operating correctly, then you should disconnect it from your mains supply and then contact
25 United Kingdom Czech Republic Baumatic Ltd., Baumatic CR s.r.o. Baumatic Buildings, Lípovà 665 6 Bennet Road, 460 01 Liberec 4 Reading
26
27
2828
3Contents Environmental note 4 Important safety information 5 – 8 Specifications 8 – 10 BHC600 8 BHC700 9 Produc
Environmental note 4 o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. all packaging mat
5Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before at
6hild Safety any time. During and after use, all surfaces will become hot. se ensure that they are kept under close supervision at all times. uld on
7leaning Cleaning of the hob should be carried out on a regular basis. appliance, it should be disconnected from the mains and cool. using this ap
o Pans should be lifted on and off the hob surface and not dragged. o Cooking zones should not be switched on without cookware placed on it. Also t
BHC700 Product dimensions: Aperture dimensions: Depth: 520 mm Depth: 495 mm Width: 700 mm Width: 565 mmHeight: 55 mm Product specifications (
Kommentare zu diesen Handbüchern