Baumatic BG67SS Bedienungsanleitung PDF herunterladen (Seite 20)

o Unscrew the injector (B) and replace it

with the stipulated injector for the new gas

supply (see table below).

o Reassemble all the burners carefully; in particular you should

make sure that the flame spreader is correctly placed on the

burner.

Gas tap maintenance

These maintenance operations MUST ONLY be

carried out by a CORGI registered engineer.

IMPORTANT: Before carrying out any maintenance operations,

disconnect the appliance from the gas and electricity supplies.

If a gas tap becomes stiff to operate, then you should proceed as

follows:

o Remove the control knobs, pan supports, burners, hob fixing

screws and clamps.

o Remove the hob from the worktop and remove any underside

protective covers.

o Disconnect the fixings holding the tap to the fascia panel and

separate the assembly. Then clean the cone and seating, with

a cloth dampened with solvent.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26

Keine Kommentare

Baumatic BG67SS Bedienungsanleitung Seite 20