Baumatic BDW13 Bedienungsanleitung PDF herunterladen (Seite 31)

Connecting

mains

water

supplyt

IMPORTANT: Do not connect the appliance to your mains water supply

using an old or an existing water inlet hose. The inlet hose supplied with

the dishwasher is the ONLY one that should be used.

DO NOT CONNECT THE WATER INLET HOSE TO A HOT WATER TAP.

o T

he inlet hose will be located inside the cabinet of the dishwasher.

o Con

nect the water inlet hose to a threaded water tap that has a 3/4” thread.

o Ful

ly tighten the inlet hose to the water tap.

IMPORTANT: If the inlet hose is fitted with an aqua stop. This

MUST be

fitted in the upright position, as shown in the above

diagram.

rain

hoseConnecting t d

Secure the drain hose, so that it cannot move whilst the dishwasher is in use.

Place the end of the drain hose on your drain pipe. Push it a short way down

into your drain pipe.

IMPORTANT: Do not insert the drain hose too deeply into the water pipe, as

this may cause siphoning.

NEVER EXTEND THE DRAINAGE HOSE FROM ITS ORIGINAL LENGTH.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 39 40

Keine Kommentare

Baumatic BDW13 Bedienungsanleitung Seite 31